How to Turn Your Epson SureColor into an Automated Printing and Lamination Line (Top MEFU Solutions)

If your print shop runs a 64-inch Epson printer—like the SureColor R-Series or S-Series—you already know how fast and vibrant your output is. But what happens the moment the print job finishes?

In most shops, production hits a wall. An operator has to unload a heavy 50kg media roll, haul it across the room, re-thread it into a standalone laminator, and deal with skewed edges or wasted leader film.

For over 18 years, MEFU has helped print businesses in more than 110 countries eliminate this exact finishing bottleneck. By connecting your 64-inch (1626mm) Epson setup directly to a MEFU 1700 Series (67" / 1680mm) Roll Laminator, you can transform two separate machines into a single, synchronized printer-laminator production line.

Here is everything you need to know about building an inline workflow—and the equipment bundles tailored for your exact ink technology.

Why Pair a 64" Epson Printer with a 67" MEFU Roll Laminator?

When building an inline printing and lamination system, physical tolerances and tension control dictate your success. Pairing a 64-inch printer with a standard 64-inch laminator leaves zero room for error—even a 2mm media drift can expose raw adhesive onto your silicon rollers.

MEFU’s MF1700 Series solves this with a 67-inch (1680mm) working width, giving your 64-inch Epson media a generous 3-inch (54mm) safety margin. Combined with an optical loop sensor bridge, the laminator automatically speeds up or slows down to match your printer's feed rate—delivering smooth, continuous print lamination without stop-marks or tension wrinkles.

Epson × MEFU Inline Configurations for Your Shop

Every print room has different volume requirements and ink curing profiles. Choose the verified configuration below that matches your daily production:

The "Zero-Wait" Industrial Line (Best for Epson Resin)

Compatible Epson Models: Epson SureColor R5070 / R5070L (North America) & SC-R5000 / SC-R5000L (Europe / Global) — 64" Resin Ink Printers

Matched MEFU Laminator: MEFU MF1700-F1 (67" Heavy-Duty Pneumatic Roll Laminator)

Complete the Line: MEFU Optical Loop Bridge + MEFU Cast/Polymeric Lamination Films

Why This Combo Works:

Epson’s UltraChrome® RS Resin ink cures instantly at high temperatures, meaning prints exit the platen completely dry and ready for immediate lamination. However, high curing heat can cause vinyl and wall-covering media to expand slightly.

The MEFU MF1700-F1 utilizes industrial pneumatic air cylinders and 130mm high-density silicon rollers to apply uniform, heavy-duty nip pressure across the entire width. It flattens thermal media waves instantly, allowing 24/7 unattended printing and lamination for bespoke wallpapers, fleet graphics, and fast-turnaround indoor/outdoor signage.

The "Print-Laminate-Trim" All-in-One Station (Best for High-Volume Roll-to-Roll)

Compatible Epson Models: All 64" Epson SureColor R-Series & S-Series Models

Matched MEFU Laminator: MEFU MF1700-C1 PRO

Complementary Gear: MEFU Flatbed Applicator & Precision Cutting Systems

Why This Combo Works:

Why stop at lamination? When upgrading your print laminat workflow, choosing a MEFU MF1700 model equipped with rear longitudinal slitters lets you automate three steps at once. As the laminated graphic exits the nip rollers, precision rotary blades automatically trim away the unprinted white side borders. Your finished roll winds onto the take-up reel trimmed to exact width specifications—saving hours of manual trimming at the finishing table.

Bespoke Custom Inline Solutions (Tailored to Your Production Needs)

Compatible Printers: Single or Multiple Epson SureColor Printers (64" and beyond, including Resin, Eco-Solvent, UV, and Sublimation lines)

Custom MEFU Hardware: Tailored Roll Laminators, Custom Extended Drying/Outgassing Bridges, Multi-Blade Slitting Modules, and Integrated Precision Cutting

Ideal For: Specialized substrates, space-constrained print rooms, and large-scale industrial automation

Why Choose a Custom Solution:

No two print factories operate the same way. Backed by over 18 years of R&D and manufacturing expertise, MEFU’s engineering team can design and configure a customized printer-laminator workflow built specifically around your daily output volume, media types, and floor layout:

Custom Bridge & Drying Modules: Running heavy-ink eco-solvent wraps? We can customize bridge lengths, optical loop sensitivity, and auxiliary infrared/fan drying modules to match your exact ink outgassing needs.

Width & Roller Customization: From standard 64" setups to extra-wide format lines, dual-heated rollers, or specialized pneumatic pressure zones for delicate films and textiles.

End-to-End Post-Press Integration: Combine inline printing and lamination with MEFU’s Flatbed Applicators, automated XY cutters, and custom-formulated Lamination Films to build a turnkey, single-vendor finishing ecosystem.

Quick Comparison: Which Solution Fits Your Workflow?

Frequently Asked Questions (FAQ)

Q: Will the laminator leave stop-marks on my print when the Epson printhead moves back and forth?

A: No. Unlike rigid mechanical linkages, MEFU’s inline system uses a non-contact optical loop sensor that monitors a floating slack loop of media between the Epson printer and the laminator. Instead of stopping and starting abruptly, the MEFU laminator smoothly modulates its micro-speed to keep the silicon rollers rotating continuously—guaranteeing zero stop lines.

Q: How does MEFU customize an inline solution for my specific shop floor?

A: Simply share your current Epson printer model, primary media types (e.g., cast vinyl, wallpaper, PET film, canvas), daily square-meter output, and available room dimensions. Our engineers will configure the exact laminator model, bridge geometry, drying assistance, and slitting attachments required to maximize your ROI.

Q: Can I still use the MEFU laminator as a standalone machine for rigid boards?

A: Absolutely. The MF1700 Series features a generous nip gap of up to 28mm (1.1 inches). Whenever you aren't running an inline roll-to-roll job, you can detach the bridge in seconds and use your MEFU machine for mounting prints onto Foamex, PVC, acrylic, Coroplast, or aluminum composite panels.

Planning to Build Your Ideal Printing & Lamination Line?

With over 18 years of dedicated expertise in roll laminators, flatbed applicators, precision cutting, and lamination films, MEFU is the trusted partner for print professionals in 110+ countries. Whether you need a ready-to-ship MF1700-F1 bundle or a bespoke finishing line tailored to your production demands, our team is ready to help.

Tell us your Epson printer model and daily production goals—our engineering team will design your tailored inline configuration within 24 hours!